Using the F-5 Button to manually start the
mixer or it can automatically start after the Batch is done. Display also shows
the Timer as it counts down.
Using the F-5 Button to manually start the
mixer or it can automatically start after the Batch is done. Display also shows
the Timer as it counts down.
Display shows the Timer as it continues to
count down.
Shows and Dump Timer doing the same as the
Mixer Timer. It can also be manually started or it can automatically start
after the Batch is done. .
Display shows the Timer as it continues to
count down
Do you require the operator to input
information that is vital for your Production reports?
For example a serial number that will count
sequentially for each Batch.
This displays to the operator that the 1st Serial number has been processed after the batch is completed.
Scale displays that the 2nd Serial number
has been processed after the batch is completed.
Using the F-1 Button the operator can input
the target and dribble weights, but also if a preact is required for each
Ingredient, he put in at the same time.
Scale display will show Batch Count
sequentially after each Batch.
Using the F-1 Button the operator can input
the target and dribble weights, but also if a Tolerance for each Ingredient is
required he can put in at the same time.
Tolerances can be input as a percentage is
necessary.
Display shows the Ingredient is “Out of
Tolerance” the operator has two choices
He can take out enough material until the
Ingredient is in tolerance and at that tome the controller will resume or he
can press the “F-1” button to accept the “Out of Tolerance” condition
