|
Manual Formula Additive System
This application, the customer wanted to
load all formulas via Ethernet from Supervisors desk. The formulas would prompt
the operators step by step on how much of each Ingredient was needed and on
which scale it was to be weighed on.
When done, each recipe is transmitted to
the supervisors computer, which includes the Time and Date, each Ingredient
number with the weight that was supposed to filled to and the actual weight
filled, batch number, and the total net weights.
It also transmitted if the scale was paused
or if the recipe was aborted.
|
|
 |
Display shows operator is receiving a new RECIPE |
|
|
 |
Shows a new recipe has been received |
|
|
 |
Display shows the operator what recipe he is now filling and to press the start button to begin. Also notice there a batch counter starting at zero |
|
|
 |
Display shows the operator that on scale 1 he is filling a target weight of 3 lbs of Ingredient # 5 and what that Ingredient is |
|
|
 |
After the weight has been filled and is tolerance, the display shows the next ingredient on scale 1 needs 2 lbs of Ingredient # 5 and what that Ingredient is |
|
|
 |
After the weight has been filled and is tolerance, the display shows the next ingredient on scale 2 needs 2 lbs of Ingredient # 5 and what that Ingredient is |
|
|
 |
Scale display verifies Formula is now complete It shows the net totals of all the scales used and that it Batch # 1 of that recipe
If the operator is to use the same recipe, it prompts him to push start |
|
|
 |
Display flashes “ Out of Tolerance” and will continue to do so, until the operator gets the weight that the Supervisor has set |
|
|
 |
Displays shows that Formula is complete and shows the net totals of all the scales used and that it Batch # 2 of that recipe |
|
|
|
